THE ASSEMBLY HALL CLOCK

Our largest indoor clock.

This is a MOBATime 500mm Flex clock but with one of our 240v mains movements fitted. So what we get is a large clock you can put high up in a hall and not need to gain access to for battery changes. As the name suggest, we get most of these out to schools but also suitable for large indoor areas like factories floors or warehouses.

The Assembly Hall Clock uses a MOBATime bezel: 500mm case with a 450mm minute-track and about 80mm deep.

Bezel fabricated from aluminium and powder coated for an off-white finish.

This clock comes with a 12hr dial with minute track.

A high quality 240 mains movement is fitted to a plastic-foam dial.

• Manufactured in Switzerland and Britain.
• Metal case construction.
• Highest quality, long life movement.
• Designed for durability and longevity.

We’ve been building Grayson clocks for more than three decades now and in a world where you can buy a plastic clock for less than a tenner, we try rise above the crowd to produce high quality, durable time pieces that can last you years and years.

Many cheap clocks are made with moulded plastic backs so once the movement fails the whole clock has to be thrown away. With our clocks all parts are replaceable; if you drop it, we can replace the bezel or the 'glass', if the movement dies then we (or indeed, you) can swap it out for a new one.

We do all repairs ourselves at our head office in Kent, we don't believe in 'disposable' clocks and that's not what we build.

..and we don’t just build battery clocks!

We also specialize in clock systems. We know that sometimes what you need is for all your clocks to tell exactly the same time. All our clocks can be fitted, for example, with minute impulse movements that can be run from a master clock and controlled centrally by GPS. Some our clocks can even run off NTP / POE via your network.

Completely synchronized, completely accurate.

Check out our movements section or give us a shout for more information.

All of our Grayson Clocks are built to order.
We try to keep all component in stock and will usually get your clock to you within 5 working days.
If we are short of components we will let you know straight away and give you a reasonable estimate of how long it is likely to be.